Skip Navigation Website Accessibility

 


 

 


Audio Technica AT853PMx Condenser Mic with Power Module & Mic Stand Adapter - New Old Stock

This unit was acquired from a music store that has gone out of business. This unit was being sold "As New" at the old store. We are selling as New Old Stock. Please note the condition of the capsule, it has a crack. This does not affect the function or sound of the mic. Comes with power module and mic stand clip.

  • Designed for high-quality sound reinforcement, broadcasting and recording applications
  • Perfect for suspension over choirs, instrumental groups and theater stages
  • Extended frequency response and uniform cardioid (120º) polar pattern
  • Wall/ceiling plate power module permits permanent installation in standard, single-gang electrical box
  • Also available in white as AT853PMWx

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30-20,000 Hz
Low Frequency Roll Off 150 Hz, 6 dB/octave
Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
Maximum Input Sound Level 130 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 103 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9-52V DC, 2 mA typical
Switches Jumper: Low-roll-off
Weight (Microphone) 0.4 oz (10 g)
Weight (Power Module) 3.4 oz (96 g)
Cable 25' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm diameter, 2-conductor, shielded; free end attaches to screw terminals in power module
Dimensions (Power Module) 4.55" (115.5 mm) H x
2.80" (71.0 mm) W x
1.42" (36.0 mm) D
Dimensions (Microphone) 1.39" (35.2 mm) long,
0.47" (12.0 mm) diameter
Output Connector Screw terminals
Accessories Included AT8102 two-stage foam windscreen; AT8451 steel hanger; AT8534(A) wall/ceiling plate power module
Audio-Technica Case Style M12