Skip Navigation Website Accessibility

 


 

 


Audio Technica AT853RWx Condenser Mic with Power Module & Mic Stand Adapter - White - New Old Stock

This unit was acquired from a music store that has gone out of business. This unit was being sold "As New" at the old store. We are selling as New Old Stock. Comes with power module and mic stand clip

  • Designed for high-quality sound reinforcement, broadcasting and recording applications
  • Perfect for suspension over choirs, instrumental groups and theater stages
  • Extended frequency response and uniform cardioid (120º) polar pattern
  • Also available in black as AT853Rx

Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30-20,000 Hz
Low Frequency Roll Off 150 Hz, 6 dB/octave
Open Circuit Sensitivity -43 dB (7.0 mV) re 1V at 1 Pa
Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 111 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9-52V DC, 2 mA typical
Switches Flat, roll-off
Weight (Microphone) 0.4 oz (10 g)
Weight (Power Module) 2.1 oz (60 g)
Cable 25' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded; free end attached to screw terminals in power module
Dimensions (Power Module) 3.58" (91.0 mm) long,
0.83" (21.0 mm) diameter
Dimensions (Microphone) 1.39" (35.2 mm) long,
0.47" (12.0 mm) diameter
Output Connector (Power Module) Integral 3-pin XLRM-type
Accessories Included AT8102(WH) two-stage foam windscreen; AT8451(WH) steel hanger; AT8533x power module
Audio-Technica Case Style M12